Смотреть Считать
Биржевые цены
Кaлькуляторы
Mark ПАНЧ-11

Mark ПАНЧ-11

Mark ПАНЧ-11

The wire is produced according to TU 1842-118-00195430-2002, 1.2 mm in diameter.

Application

Alloy Welding Wire ПАНЧ-11 on the basis of nickel is used for welding high-strength cast iron, or rather brewing fallen off portions of parts, cracks, holes worn. The wire contains elements that contribute to the formation of the weld quality by preventing the oxidation of the weld pool. Also, this brand of wire can be welded semi-open arc without protecting gas or flux.

Chemical composition

Element

Mn

Fe

Bi

C

Si

As

Cu

Pb

Mg

Ni

Content,%

5-6

до 2

0.002

0,3

0,3

0.03

2,3-3

0.002

0.1

87

Mechanical properties:

Impact strength at -20 ° C – 55 J / cm2;

Tensile strength – 600 MPa;

Tensile strength – 480 MPa;

Elongation – 23%.

Телефон / Факс

Мобильный телефон

Мобильный телефон